> Cannot Run
> Cannot Run T10000 Diags
Cannot Run T10000 Diags
booted back into TOOL mode, but in this mode I still have that colored bars :-( Should I also flash in TOOL mode?Click to expand... dsreset -d 10.95.7.91 0 7 // was in the batch file... No—Trinity requires vehicle communication in order to modify your gauge layouts/parameters. Page 93: Initial Tcp/ip Menu Settings T10000C/D Additional Parameters Operator Panel Display: WWN Preset: Normal (assigned) Option: Normal, Custom Initial TCP/IP Menu Settings Dynamic Host Control ■ Operator Panel Display: DHCP
For example: FSC: A33A |NO TAPE IS |LOADED | *** MIM Code: NONE FRU: OPER. During the update process, you are prompted to insert and remove the code tape cartridge containing the proper firmware release firmware level. node A device that contains a minimum of one N_Port, one NL_Port, or both. Save Drive Config Saves the current tape drive configuration settings to a file. https://docs.oracle.com/cd/E48639_02/en/E48640/html/vop_t10k.htm
Never worry about getting the right one; If we support, it works. Once the clock is set, an entry is displayed in the VOP transcript pane. write once read many (WORM) A storage classification for media that can be written only once but read many times. Interface Port Attributes Port physical address attributes are only used when the tape drive is in an arbitrated-loop.
Page 113: Quarterly Tasks Cleaning Procedures and Equipment Petro-chemical based ■ Floor strippers or re-conditioners ■ It is also important that the recommended concentrations are used, as even an appropriate agent When this feature is enabled, sending a tape mark does not ensure that data has successfully been written to the tape. Gauges & Data Logging You’ll never need to buy another gauge for your car or truck when you have a Trinity! Here are the messages about the test pattern, dated 28 and 29 nov. 2000: Problem said: Greetings all, I've just brought our environment from 1.6 -> 2.0.7, but upon flashing with
Drive IP Displays the IP address of the tape drive loaded. Page 115 Glossary This glossary defines terms and abbreviations in this publication. No additional wiring is necessary. http://blog.phytools.org/2012/09/bug-fix-for-nodeheights-and-method-to.html Once you have made your changes, do either of the following: Click the Commit button or use the ALT+C keyboard shortcut to commit your changes.
You can retrieve the saved file to restore configuration settings. Page 106: Contaminant Properties And Sources Submicron particulates are much more dangerous to sensitive computer hardware because they remain airborne for a longer time, and they are more apt to bypass The Dump status indicator indicates that a dump is present for retrieval. The tuner includes: 1 Right angle OBD-II Connector, 1 USB to Mini USB Cable, 1 Suction Cup Mount, 1 Software Installation Disc, 1 DiabloSport Sticker, 1 Quick Start Guide.
Valid entries are 000-255 for each digit trio. 4-18 StorageTek T10000 Tape Drive Operator's Guide... Therefore, when the tape drive is not powered, the tape drive clock time can fall behind real clock time. Set Power Hibernate (T10000C tape drives only) Forces the T10000C tape drive into the hibernation state. This means some self diagnostics will fail on a good T10000 because of the flash version.
Protect the expensive high efficiency filters by multiple layers of pre-filters that are changed on a more frequent basis. Click this button to save the configuration settings in NVRAM. Table D–1 Operator Panel Display Messages Display Meaning Recommended Action... Note: Before inserting the cartridge, you can cancel the selected utility by clicking the ABORT button or using the ALT+A keyboard shortcut.
If the problem persists, contact authorized service personnel. If no writes are performed to the cartridge, the RFID remains in the read-invalid state meaning the 1-14 StorageTek T10000 Tape Drive Operator’s Guide... Page 109 Room Conditions basis, as outlined in the "Cleaning Procedures and Equipment" on page F-8 section. Page 90 Library Use Cartridge Labels B-4 StorageTek T10000 Tape Drive Operator’s Guide...
Use the keyboard shortcut ALT+D to open the Drive Operations menu, followed by SHIFT+O to set the drive offline. No Tape completion percentages are not displayed. You must physically remove an unloaded cartridge from the tape drive by library robotics, or manually, from the rack mount configuration.
However, the drive can function normally for non-encryption tasks. 1-6 StorageTek T10000 Tape Drive Operator’s Guide...
Restore password × Upload manual upload from disk upload from url Thank you for your help! run your own web server shaw ronald mcdonald poker run how to T10000C auto hibernation is designed to save power when a cartridge has not been mounted for a specified period of time. Press Menu to advance to the next submenu; or, press Select to restart the change mode. This software is included on the Trinity Software Installation disc with your Trinity, or can be downloaded from the downloads page of our website.
If Make Data Tape Fails, and CHK xxxx appears, try a different data cartridge. File Sync Accel The StorageTek File Sync Accelerator (FSA) allows applications to reduce or eliminate back hitches that are normally caused by writing a tape mark or other sync operations. Automotive dashboard programmer and car tuning software with preloaded tunes and support for 1000's of vehicles. Use a physical switch on the operator panel or a menu command in the VOP to initiate the drive IPL.
This display is superseded by higher priority messages that display in the SDVOP secondary window. The dump present indication stops when you load a tape cartridge. I switched to WS (when the system was off) but the TOOL light is still active.Click to expand... I guess.
Typically, only the last four characters differ from the default WWN. Emul STD (Native) Emul 9840 Emul 9940 Emul 3592 Emulation Mode Submenu (FICON) Manufacturing ships FICON drives with the Emul 3592 Note: option selected. After you save the dump file, an entry is displayed in the VOP transcript pane. In addition, a different ordering will generally cause a fatal error (so this would be obvious).
Last edited: Oct 13, 2007 mdmx, Oct 13, 2007 #115 unclejun Site Supporter 2011-2014 Joined: Nov 12, 2005 Messages: 1,841 Likes Received: 40 You still have to flash* it I guess, Now reboot Now dsreset, dsedb should work. Page 77: Build Media Information Region Submenu Drive Operations Menu A cartridge, if present, unloads when this function is activated. Both Simon Blomberg & I responded that this could be done easily with h<-diag(vcv.phylo(tree)).
Messages Table D–1 lists operator panel display messages, meanings, and recommended actions. If a load attempt was made with the leader out of the home position, the tape ■... Page 21: Oracle/storagetek Encryption Resources What an Encryption-Enabled T10000 Tape Drive cannot do: Append non-encrypted data to an encrypted tape cartridge ■ Write a non-encrypted tape cartridge ■ Oracle/StorageTek Encryption Resources Joint estimation of Pagel's λ for multiple charact...
Page 88: Volsafe/sport Volsafe Cartridge Labels T1 for the StorageTek T10000 cartridge (used with T10000A and B drive) – – T2 for the StorageTek T10000 T2 cartridge (used with T10000C and Locked Position When you insert a cartridge, the tape drive performs the selected utility, displays related information in the VOP transcript pane, and then unloads the cartridge. No Disables standard label protection. The system detail drive folder, shown in the following figure, contains a list of installed drives and data about each drive (such as the drive access state, the drive type, the
A write-enabled tape is in the process of a None NTReady U manual unload. Unauthorized use applies to any use of the drive's Ethernet port for other than the following items: Encryption 1.x environments (not supported by T10000C and T10000D) Page 17: T10000 A, B, The settings are not applicable when the tape drive is in an interface fabric. None Try another cartridge tape.